Good boxing arcade machine placement starts with two measurements: the space guests need to play and the route the cabinet will take into the bar. Make both checks before comparing payment options or cabinet finishes. The following seven checks help venue managers brief a supplier and test the proposed spot before placing an order.
Jump to player space · delivery route · site survey checklist

1. Mark the boxing arcade machine placement on your floor plan
Draw the cabinet footprint, the player area and the space needed to open the service door as separate outlines. Ask the supplier for the required clearances for the exact model, including space behind and beside the player. For a punch-and-kick model, ask for the clearance drawing for both game modes. On site, mark the outlines with removable tape so your team can test where guests would stand.
2. Check the location during a busy shift
Check the boxing arcade machine placement during peak service. Walk the route from the entrance to the bar and the restrooms. Check where people waiting to play would stand and whether the queue would cross a doorway, an accessible route or a staff route. Ask a colleague to walk past the taped outline carrying a tray to see where the layout becomes tight. For U.S. venues, the U.S. Access Board’s accessible routes guide is a useful reference to review with the venue’s facilities team.
3. Listen to a full game cycle
Request a video of the proposed cabinet showing a full game, from the start prompt to the score display. Ask which sounds the operator can adjust, and whether attract-mode sounds can be turned down separately. The impact itself may still be audible even with the speaker turned down. If two spots work on paper, listen from the nearest seats before finalising your boxing arcade machine placement. Consider where guests are seated and how the machine would sound during quieter hours.
4. Measure every part of the delivery route
Record the clear width and height of the narrowest doors, the tightest turns and any lift opening. Measure at the narrowest usable point, allowing for door hardware or rails that project into the route. Ask for packed and unpacked dimensions, gross weight and handling instructions. If the cabinet ships in sections, ask who assembles it and which pieces must travel through the venue together.

5. Confirm power and payment at the proposed spot
Send the supplier your destination, intended payment method and the exact model you want quoted. Verify the voltage and plug configuration on the quote and ask where the power lead exits the cabinet. If you intend to charge per game, request a demonstration of payment and game start with the intended coin, token or supported terminal. If you plan to run private events, confirm whether the model can be switched to free play.
6. Leave room for daily checks and repairs
Review boxing arcade machine placement with the staff member who will service it. Confirm where the service door and coin compartment open and whether staff can reach them when furniture is in its usual position. Ask what your opening team should inspect and how to take the machine out of service if a fault appears. Request the relevant spare-parts list, including the punching bag and wear items for the exact model. Keep the supplier’s service instructions with the machine.
7. Give the supplier a short placement brief
A boxing arcade machine placement brief helps the supplier match the cabinet to the site and spot delivery constraints before shipment. Include a floor plan or photo of the proposed location, measurements of the narrowest access points, the destination postcode or ZIP code, your preferred payment setup and the number of machines. Ask the supplier to confirm the model, dimensions, delivery terms and any options as separate quote lines.
Boxing arcade machine placement checklist for a site survey
- Customer area: Record the cabinet footprint, player clearance and where guests will wait.
- Delivery route: Note the narrowest doorway, turns, thresholds and any lift.
- Operations: Record the nearby power supply, payment setup and access needed for daily checks.
Example: If the only available space is beside a service door, test the player area and the queue separately. A narrower cabinet may solve the delivery problem while leaving too little space for guests to step back. Before choosing a model, measure both areas with the door open and ask for a layout drawing of the proposed unit.
How to choose between two workable locations
Compare both locations during the same shift before committing to your boxing arcade machine placement. At each one, walk the staff route, mark where a player would stand, and ask a colleague to wait where the next guest is likely to queue. If one location needs staff to move furniture every time the cabinet is serviced, record that as a recurring operating cost in time. If guests at a nearby table can hear the game clearly, test a different orientation before ruling out the location.
A compact cabinet can help with a tight footprint, but still check the access needed to bring it in and service it. For a venue with a busy corner near the bar, a spot farther from the queue can be easier for both guests and staff to use. For a venue with a quieter side room, check whether staff can see the machine from where they work and whether guests can find it without crossing a service area.
Give the proposed boxing arcade machine placement a label on your floor plan before requesting a final quote and send photos taken from the delivery route and the player side. Ask the supplier to mark which way the service door opens and to identify any constraints their drawing leaves unclear. Keep that marked plan with the purchase order so the receiving team can confirm the agreed spot.
Compare commercial boxing arcade machines if you are ready to move from boxing arcade machine placement to model selection, or review our boxing arcade machine pricing guide or send us your layout for a model-specific quote.


